Bluetooth sensors

Thanks to the Bluetooth module inside the device, there are many ways to expand the Smartbox 2 MAX with additional functions – using external sensors with Bluetooth support. You will install the accessories in vehicles, containers, or monitored objects and use external accessories to communicate with your SmartBox2 application, therefore you do not have to have an application for each sensor separately.
Note: Bluetooth sensors are available only for Smartbox 2 Max.

Supported devices

Smoke detector ES61

When the smoke concentration in the air reaches the set limit, the smoke detector emits an alarm with a high decibel immediately. IF you connect the detector via Bluetooth module with the app, an alert via a text message or a phone call will be sent to your mobile device.

  • alarm sound level: 85 db
  • sensitivity: 1% ~ 3 FT (0.14 – 0.43 dB / m)
  • ultra-low power consumption (3 years in standby mode)
  • innovative smoke chamber design with much higher sensitivity
  • size: 130 mm x 35 mm
  • options: 868 MHz / 915 MHz / Z-WAVE

CTek CTX battery monitor

The wireless car battery status monitor is from the Ctek company and is intended for connecting to a car (boat, RV,…) battery. It monitors the status of the battery. After detecting (in the application) a low battery level, you can connect the charger to the CTek connector and charge the battery immediately.

  • wireless communication via Bluetooth
  • charging the car battery through the CTek connector
  • designed for lead-acid starter batteries from 4.5 Ah (WET, MF, CA / CA, AGM and GEL)
  • Bluetooth 4.0 compatible

Water detector

Bluetooth sensor will alarm when a water leak is detected. Detection is done by measuring resistance between metal pins that are located on the base. The device can send data regarding the MAC address and low battery status reports.

  • operating temperature -20 ° C to 50 ° C
  • size 60 x 15 mm
  • sensitive detection
  • low-energy equipment, very long standby mode
  • low battery message
  • tamper detection
  • Bluetooth communication (100 m)

Temperature sensor Ql WTS100

The wireless sensor used to monitor the temperature. It works based on the frequency 433.92 MHz.

  • dimensions 70 x 61 x 23 mm, weight 117 g
  • operating voltage 2.4 V to 3.3 V DC
  • operating temperature -20 ° C to + 60 ° C
  • 2 AA batteries
  • sensitivity (FSK) -105 dBm @ 1 Kbps
  • pairing and configuration using the side button
  • standby time 3 years (under normal environmental conditions, report once a minute)
  • when lit, the LED indicator indicates pairing or data transfer

BTT01 temperature recorder

Beacon with high-precision temperature sensor, BLE 5.0 and Bluetooth. Battery life 3 – 5 years. You can find out the history of temperature changes, GPS position and MAC address directly on your mobile application. It collects temperature data every 60 seconds and sends it every 300 seconds for up to 180 days.

  • transmission power 8 dB
  • transmission frequency 5 s
  • transmission distance 500 m
  • waterproof IP67
  • standby mode for 4 to 6 years
  • size 66.5 x 56 x 6.7 mm

Temperature and humidity sensor Ql WTH300

The WTH300 (QL) sensor measures the temperature and humidity in the monitored environment. The sensor has two batteries (FR03 Li-Fe, 1250 mAH), with a lifespan of 3 years. If the internal battery is low an alarm is reported. It collects samples every 1 second.

  • dimensions: 70.6 x 38 x 17.8 mm
  • operating voltage: 2.7 V ~ 3.3 V DC
  • operating temperature: -40 °C ~ + 70 °C
  • waterproof IP66
  • carrier frequency: 2.4 GHz
  • supports the BLE 4.2 protocol
  • transmission distance: max 100 m (open area)
  • temperature measuring range: -40 °C ~ + 70 °C

Battery monitoring

Battery indicator to monitor the battery status. Once hooked up to the battery, you simply connect to the application via Bluetooth 4.0. If there is
any issues regarding the car battery or charging, the device will automatically send a notification to your mobile or web application SmartBox2.

  • average current: 1 mA
  • input voltage 6 – 20 V
  • operating temperature -40 ° C – 90 ° C

  • dimensions: 75 x 50 x 21 mm
  • short circuit protection: built-in
  • Bluetooth 4.0
  • Device Name (BT): Battery Monitor
  • App keyword (9-16V) BM300