What is SMARTBOX 2 LITE

GPRS terminal adds an altitude and a GPS position and sends all the information to the IoT server in a real time via mobile data. Servers process the data, allowing to view it in the graphs, maps or the generated alerts.

SMARTBOX 2 LITE specification

  • Immediately ready for action

  • Up to 2 years battery life

  • Easy charging via a docking station

  • Water resistant
  • Slots for strap attachment
  • Built-in magnets for strong attachment
  • Real-time GPS tracking
  • Permanent route control
  • Alerts notification when exceeding preset limits

Technical parameters

SMARTBOX 2 LITE

Dimensions: 95x144x33 mm (+2mm magnet)
Weight: 436g
Battery capacity: 12Ah
Battery life: Up to 2 years standby

Operational temperatures
Charging: 0 °C to 45°C
Discharging only: -20 °C to 55 °C

When using intelligent BX power management, battery life is up to 2 years.

GNSS system

U-blox M10S concurrent GNSS module GPS, GLONASS, Galileo, Beidou, 72 Channels engine

  • Less than 25 mW power consumption without compromising GNSS performance
  • Maximum position availability with concurrent reception of 4 GNSS
  • Proven excellent performance, even with small antennas
  • Advanced spoofing and jamming detection

Cold start: 26 s
Hot start: 1 s
Aided Cold Start: 5 s

A-GNSS: AssistNow Online, AssistNow Offline, D-GPS, Battery backed RAM

Battery and GSM signal indicator
External GPS RMA connector (optional)

SMARTBOX 2 LITE LORA

Optional LoRa Gateway

The LoRa gateway, an accessory of the SMARTBOX system, is designed for the wireless connection of up to four LRN probes or other wireless LoRa sensors. LoRa technology offers a long range for data transmission with minimum energy consumption.

It integrates a Cloud-native multi-constellation global navigation satellite system (GNSS) scanner and a passive Wi-Fi MAC address scanner as a backup for geolocation if there is no GNSS available for example in a dense urban area.

  • Long Range 2.4GHz transceiver

  • Wi-Fi ultra-low-power passive scanning 802.11b/g/n

  • High sensitivity, down to -132dBm

  • +12.5dBm, High efficiency PA

  • Low energy consumption, On-chip DC-DC

  • LoRa, FLRC, (G)FSK supported modulations

  • Programmable bit rate

  • Excellent blocking immunity

  • Ranging Engine, Time-of-flight function

  • BLE PHY layer compatibility

  • Low system cost

Smart solution

When developing SMARTBOX we wanted to make it easy to use. SMARTBOX can be easily attached to the transport so that it cannot be lost and is easy to charge by placing into the charging cradle.

Two strong magnets

SMARTBOX has two strong magnets placed on the bottom of the case which makes attachment to any ferrous metal surface a snap– for example placing onto a vehicle frame or a shipping container.

Strap slots for attachment

SMARTBOX has two slots on each side so it can be easily strapped to most anything.

Charging cradle

Charge SMARTBOX easily by placing it into the charging cradle. The charging cradle is equipped with spring-loaded, gold-plated contacts ensuring perfect contact when charging. No need to disassemble when charging.

Data sheet to download